Not sure what you are seeing? Analyse your ClinicalGuard test with ClearLine.
Yes — ClinicalGuard has a sensitivity of 20 mIU/ml and can detect pregnancy at 11 if HCG is above this threshold. Typical HCG at 11 is 20–80 mIU/ml. A faint line at 11 on ClinicalGuard is a meaningful result.
A faint line on a ClinicalGuard test at 11 DPO is a meaningful result. HCG at 11 DPO typically ranges from 20–80 mIU/ml — well above the 20 mIU/ml sensitivity of ClinicalGuard in most cases.
If you are seeing a faint line at 11 DPO on ClinicalGuard it is very likely a true positive, particularly if the line has pink colour and appeared within the 5 minute reading window. Retest in 48 hours with FMU and the line should be noticeably darker.
ClinicalGuard uses pink dye. A true positive line on ClinicalGuard at 11 DPO will be pink in colour — even if very faint. The key things to look for are:
ClinicalGuard tests have a well documented indent line that is colourless. A true positive should have visible pink colour. If the line has no colour — particularly on an inverted or enhanced image — it is most likely the indent.
ClinicalGuard can occasionally produce evaporation lines. An evap line typically appears after the reading window and has no colour. If the line on your ClinicalGuard test appeared within 10 minutes and has pink colour it is more likely to be a true positive.
ClinicalGuard strips are known for having a visible indent line that is frequently discussed in the TTC community. The indent appears in the test line position and can look like a very faint positive particularly on enhanced photos. Always check for colour.
ClinicalGuard has a high risk of indent lines.
An indent line is a colourless depression in the test strip where the test line would appear if positive. It is caused by the manufacturing process and is not a positive result. Key characteristics of an indent line on ClinicalGuard:
- Has no pink colour — appears grey or colourless - Is visible on the dry test strip even before dipping - May become more visible on inverted or enhanced photos - Does not indicate pregnancy
ClinicalGuard has a well documented indent line that is frequently discussed in the TTC community. If you are seeing a colourless line on your ClinicalGuard test at any DPO, it is most likely the indent rather than a true positive.
At 11 DPO, typical HCG levels range from 20 to 80 mIU/ml. This is a wide range because HCG levels vary significantly between women and between pregnancies.
ClinicalGuard has a detection threshold of 20 mIU/ml. This means:
The Mayo Clinic notes that HCG roughly doubles every 48 hours in early pregnancy. If you retest in 48 hours the line should be noticeably darker if HCG is rising as expected.
11 DPO is a good testing point for most sensitive tests. A negative at 11 DPO is still possible particularly with average sensitivity tests. If testing on a less sensitive test and getting a negative, try a more sensitive test before concluding the result.
48 hours is the recommended retest window after a faint result at 11 DPO. This is because HCG roughly doubles every 48 hours in early pregnancy — retesting after this interval gives the best chance of seeing a meaningful change in line darkness.
FMU is still recommended at 11 DPO for the most accurate result.
When retesting:
Not sure if what you are seeing is real?
ClearLine uses AI to analyse your ClinicalGuard test photo and detect even the faintest lines. Enhance your image with brightness, contrast and red light filters to see lines more clearly. Save and compare your tests side by side to track line progression.
Also see:
Also see:
Related guides:
Yes — a faint line at 11 DPO on ClinicalGuard with pink colour that appeared within the reading window is likely a true positive. Retest in 48 hours to confirm progression.
Yes. ClinicalGuard has a sensitivity of 20 mIU/ml. Typical HCG at 11 DPO ranges from 20–80 mIU/ml, so detection is possible in most pregnancies.
Evap lines on ClinicalGuard typically appear after the reading window, have no pink colour, and appear grey or colourless. ClinicalGuard has a medium risk of evaporation lines. ClinicalGuard tests have a well documented indent line that is colourless. A true positive should have visible pink colour. If the line has no colour — particularly on an inverted or enhanced image — it is most likely the indent.
An indent line on ClinicalGuard is colourless — it has no pink colour and appears grey. ClinicalGuard has a high risk of indent lines. It is a depression in the test strip, not a positive result.
48 hours — FMU is still recommended at 11 DPO for the most accurate result.
ClinicalGuard has a sensitivity of 20 mIU/ml — Other sensitive brands like FRER and Clearblue have similar or lower detection thresholds.
At 11 DPO, HCG typically ranges from 20–80 mIU/ml. If you are on the lower end of this range or implanted later, your HCG may barely exceed ClinicalGuard's 20 mIU/ml threshold, producing a faint line. Retest in 48 hours — a rising HCG will produce a darker line.
iOS App
Upload your ClinicalGuard test photo to ClearLine. Our AI analyses your test and detects even the faintest lines — with image enhancement tools, a progression gallery and side by side comparison to track your line getting darker.
Download ClearLine
